Til toppen

Scubapro transmitter Smart+ LED

Produktnummer: 05055030
Lagerbeholdning:

inkl. mva.

Scubapro trådløs sender Smart + LED

The easy way to enjoy reliable air integration.

Enjoy the convenience of air integration without the hassle of a dangling hose. This low-profile Smart transmitter works with SCUBAPRO's most advanced dive computers. It screws into a high pressure port on your first stage and relays tank pressure and true remaining bottom time (RBT) to the computer screen.

The latest version features a built-in LED located at the top of the cap that gives you an estimate of pressure when the first stage is attached to a tank. This lets you know if the tank has gas without needing to activate the computer.

Technical Information

  • Easy to use, you only need to pair it to your dive computer once -- the first time you use it.
  • Coded transmission technology prevents interference between different dive computers.
  • Powered by a 3V CR 2/3 AA lithium-manganese battery that's good for two years or 400 to 450 dives.
  • Compatible with Galileo Sol, Galileo Luna, M2, G2, Galileo HUD and A2 personal dive computers.

LED Indicator Status:

  • 1,450psi/100bar and over = Slow short blinking Green light. Between 1,450psi/100bar and 725psi/50bar = Short double blinking Orange light. Below 725psi/50bar = Long single blink Red light.
  • Operating temperature: -10°C to + 50°C (14°F to 122°F)
  • Maximum operating pressure: 300 bar (4350 psi)
  • Maximum operating depth: 300 m (984 feet)
  • Battery life: 2 years / 450 dives
  • Tank pressure indicator: LED green, orange, red