Til toppen

Christolube O2 Grease, Tube, 57 gram (2 oz) MCG111 Lubrication Technology

Produktnummer: MCG-111-2OZ

inkl. mva.

Oksygenkompatibelt smøremiddel

Christo-Lube® 2 Oz / 62 g

Oxygen safe lubricants

It’s a simple fact that lubricants are the most vulnerable and easily ignited component in any high pressure system.
The simple solution is choosing the right lubricant. CHRISTO-LUBE® fully fluorinated lubricants are ideal for
use in systems where non-reactivity with harsh chemicals including strong acids and oxidizers, fuels, solvents,
etc is an important factor.

Safety built in – CHRISTO-LUBE® oxygen compatible lubricants are chemically as well as biologically inert,
non-toxic, non-flammable and have no fire or flash point which results in them being the safest lubricants for use
in medical / industrial gas and SCUBA applications

Plastic / Elastomer Compatibility – CHRISTO-LUBE® oxygen compatible greases and oils have excellent
compatibility with plastics and elastomers and have minimal effect on weight, volume, elongation and tensile
properties. The performance of the plastic and/or elastomer is therefore not negatively impacted by the lubricant.
For a partial list of plastic / elastomer compatibility please click here.

Food Grade – The majority of the CHRISTO-LUBE® lubricants offered into the oxygen service industry have
been submitted to the National Sanitary Foundation (NSF) and approved as an H-1 lubricant. This certifies that
the lubricants are accepted for use in or around food processing areas with potential for incidental food contact.
The NSF Nonfood Compounds Registration Program is a continuation of the USDA product approval and
listing program, which is based on meeting regulatory requirements including FDA 21 CFR.


  • Chemically inert
  • Oxygen compatible
  • Non-migrating
  • Odorless & non-toxic
  • Non-flammable synthetic grease
  • Qualified under military specification MIL-PRF-27617F


Size: 0,5oz jar, 1oz Syringe, 2, 4 and 8 oz. tube
Expiration Date: 5 years - actual date is printed on the label

Base Oil:

  • Type: PFPE
  • Temperature Service Range (°C): -60 to 260
  • Flash Point (°C) (ASTM D92): None
  • Vapor Pressure (torr) (Knudson)
    • 20°C 5 x 10-6
    • 100°C 5 x 10-5
    • 200°C 3 x 10-4


  • Thickener: PTFE
  • Color: White
  • Appearance: Smooth
  • NLGI Grade: 1.5
  • Penetration: (ASTM D217 / DIN 51804-T1)
    • Unworked 290-310
    • Worked: 60X 290-310
  • Oil Separation (ASTM D6184): 24h at 149°C 10% max.Evaporation (CTM-1): 24h at 149°C 3% max.
  • Evaporation (CTM-1): 24h at 177°C 0.53%
  • Water Washout (ASTM D1264 / DIN 51807-T2): 60 min at 79°C 1.22%
  • Four Ball Wear (ASTM D2266 / DIN 51350-T5): 60 min 1200 RPM 75°C 40kgf 1.36mm
    • Dynamic Coefficient of Friction (steel on steel): 0.076
  • Specific Gravity: (CTM-2) 25°C 1.905
  • Low Temperature: Torque (ASTM D1478) -40°C
    • Start 324 g-cm
    • Run 60 min 147 g-cm